| Make | Model | Problem | Solution | Date |
| | | |
| Found: 29
|
| Daewoo | TVC14VP | Dead - led flashes red/green | R817 o/c | 14-09-04 |
| Goodmans | TVC1400 | DEAD | CHECK FOR DRY JOINTS ON C817 | 14-09-04 |
|
|
| Goodmans | TVC1400 | POOR BRIGHTNESS LOOKS LIKE CRT | REPLACE C543 10MFD250V ON CRT BASE | 14-09-04 |
| Goodmans | TVC1400 | TRIPPING LED FLASHING | REPLACE C811 IN POWER SUPPLY | 14-09-04 |
| Goodmans | TVC1400 | Tripping with LED flashing in time | C811 in PSU | 14-09-04 |
| Goodmans | TVC1400 | Trips when first sw on | C811 100mfd 25v next to chopper tr | 14-09-04 |
| Goodmans | TVC141 | Child lock - unlocking | press blue/yellow/green/red/standby/standby within 10 secs | 14-09-04 |
| Goodmans | TVC141 | Dead | STRS5707, C835 2200pf 630v s/c (uprated to 2kv), R817 0R3 WW Res, C818 330µ | 14-09-04 |
| Goodmans | TVC141 | Dead - no st/by light | Dry joints on power sw - remove deck & main pcb for access | 14-09-04 |
| Goodmans | TVC141 | NO PICTURE OR SOUND (BLANK RASTER) | REPLACE MICRO AND ENTER SERVICE MODE AND SET LEVELS,(IC703) | 14-09-04 |
| Goodmans | TVC141 | No raster - sound ok | LOPTx faulty - no A1s | 14-09-04 |
| Goodmans | TVC141 CP420 | Focus & screen adj faulty - looks like CRT | I501 TDA8374A | 14-09-04 |
| Goodmans | TVC141/142 | Vol locked in mid posn | EEPROM 24C08P | 14-09-04 |
| Goodmans | TVC141/142 | VOLUME LOCKED | REPLACE EEPROM | 14-09-04 |
| Goodmans | TVC142T | Dead with st/by psu running | No 8v from main psu due to dry joints on power touch sw | 14-09-04 |
| Goodmans | TVC142T | No contol of vol - stuck halfway | EEPROM 24C08P | 14-09-04 |
| Goodmans | TVC142T | No control over vol - will go in/out of mute | EEPROM faulty | 14-09-04 |
| Goodmans | TVC146TWS Pan TX14GV1 | Dead - relay slowly clicking | standby I.C. I807 a TOP210PFI and C840 47mfd | 14-09-04 |
| Goodmans | TVC14PV | Dead | Replace C807, C811 (100µF 16v), C831 (470µF 25v), C814 (1µF 50v), D2499 (BU508AF) | 14-09-04 |
| GOODMANS | TVC14VP | DEAD, TRIPPING | REPLACE C807 MAIN SMOOTHER (180MFD400V) | 14-09-04 |
| Goodmans | TVC14VP | INT NO AUDIO | CHECK/ REPLACE R618 | 14-09-04 |
| Goodmans | TVC14VP | LED flashes R/G with burning LOPTx | QF01, DF04 & LOPTx | 14-09-04 |
|
|
| Goodmans | TVC14VP | POOR PICTURE AND NOISY | CHECK R217 6.8K FOR HIGH VALUE | 14-09-04 |
| Goodmans | TVC14VP | St/by only - relay clicks at sw on | Replace HT pot VR801 4k7, D807 BYV95C, Q801 2SD1555 & I801 chopper chip TDA4601 & check for dry joints | 14-09-04 |
| Goodmans | TVC14VP | Tripping or dead | C807 180µ 400v mains smoother | 14-09-04 |
| Goodmans | TVC14VP Daewoo CP310 | Dead with mains fuse o/c | Chopper tr, TDA4601 & C811 100µ | 14-09-04 |
| Goodmans | TVP14VP TVC1400 | No chan change or vol adj | Micro lock up - press reset button under front flap | 14-09-04 |
| Proline | TVC140 | Blank, bright raster with fb lines | IC45 (TDA6107Q) on tube base, also R996 (56 ohm) also on tube base, 180 volt feed r to IC. | 14-09-04 |
| Proline | TVC140 | Dead - LOPTr 2SD2578 (with integral diode) s/c | Replaced with BU508D - now have bright raster with fb lines - IC45 TDA6107Q RGB o/p chip & R996 56R 2w o/c on crt base | 14-09-04 |