* The model is component system unit of Monitor Unit, Tuner Unit and DC/DC Converter Unit.
Caution : The part marked with ! is generating a high Voltage, so care will be necessary when working. * DVD region number (playable region number) : Region Number 2 or ALL
4/03-A TO ALPINE Home Page 68E35542S01
IVA-D900R The following cautions will prevent accidents in the workplace and will ensure safe products. *The symbols indicate caution is needed to prevent injuries and damage to property. The symbols and their meanings follow.
If you ignore this symbol and handle the product incorrectly or unsafely, Warning serious injury or death may result.
If you ignore this symbol and handle the product incorrectly or unsafely, Caution injury or only material damage may result.
*The following symbols indicate two levels of cautions.
When you see this symbol, you have to be very careful.
When you see this symbol, you have to follow the instructions there.
Warning Do not look squarely into the laser light Fuse Caution coming from the pickup. Always use a designated fuse. You may loose you sight. Use of an incorrect fuse may result in a fire.
Caution Do not allow wiring to be caught in the Battery Caution screw/chassis. Use the designated battery. If wiring is caught in the screw/chassis, it may Confirm the correct polarity and seat of the battery. cause a short circuit, resulting in a fire. An incorrect battery or an improperly connected or seated battery may result in a fire.
High Temperature Caution Designated Parts Caution Touching the heat sink may cause severe burns. Look up the part list and ensure that only designated parts are used to prevent problems or accidents.
Reverse Power Supply Connections or Wiring Caution Misconnections Caution Ensure that the wiring is correct when rewiring to Reverse power supply connections or prevent problems with ignition/breakdown. misconnections may cause ignition problems and smoke may result.
Soldering Caution Wear Gloves Hot solder from solder splash may cause severe Wear gloves to prevent electrical shocks or injury burns. from the end face of the metal.
For the FDA laser standard, the following CAUTION label is stuck on each product. Please be careful for repair. CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM Contents Packing Assembly Parts List
Packing Method View
System Connections
Adjustment Procedures
Extension Cable
* Monitor Unit Block
* Tuner Unit Block
* DC/DC Converter Unit Block
Cabinet Assembly Parts List (Monitor Unit)
DVD Deck Mechanism Assembly Parts List
Electrical Parts List (Monitor Unit)
Cabinet Assembly Parts List (Tuner Unit)
Electrical Parts List (Tuner Unit)
Cabinet Assembly Parts List (DC/DC Converter Unit)
Electrical Parts List (DC/DC Converter Unit)
NOTE : Due to continuing product improvement, specifications and designs are subject to change without notice. Packing Assembly Parts List 415
Symbol Part No. Description Symbol Part No. Description 413 No. No. 412 411
3 2 1 IVA-D900R 8 4 ILLM To remote control Nothing connects To the instrument cluster interface box with this line. (Orange) illumination lead 9 10 * 11 7 BATTERY 5 BATT (Yellow) (Yellow)
GND 6 (Black )
GND 37 (Black)
REMOTE OUT AUX1 17 (White/Brown)
REMOTE OUT AUX2 17 IVA-D900R To remote (White/Brown) Tuner BOX input lead. REMOTE OUT AUX3 17 (White/Brown) SUB W. 38 10 PREOUT REAR 39 REMOTE IN AUX1 18 FRONT (White/Brown) 40 R L
POWER SUPPLY
Ai-NET
REMOTE IN AUX2 18 To remote 14 output lead. REMOTE IN/OUT VIDEO
(White/Brown) 12 NAVIGATION IN AUX OUT
AUDIO L
R REVERSE 19 1
2
DISPLAY OUT VIDEO
(Orange/White) To plus side of the (MONO)
13 AUX IN 1/2
AUDIO L
back lamp signal R
lead of the car 1
2
REMOTE 3
CAMERA IN VIDEO
(MONO) TURN-ON 20 AUX IN 3 L
AUDIO
R (Blue/White) 21 RADIO ANTENNA IN 15 22 POWER ANT P.ANT (Blue)
16 AUDIO (Blue) EQ/DIV 23 INTERRUPT IN (Pink/Black) 24
NORM PARKING BRAKE 25 (Yellow/Blue) 26
ACC 27 * ACC (Red) (Red)
28 BATTERY 5 (Yellow)
GND 6 (Black)
*Note: Be sure to connect the leads correctly after identifying the ISO connector terminals for the Battery SPEAKER SPEAKER SPEAKER SPEAKER LEFT LEFT RIGHT RIGHT and Ignition (ACC). FRONT REAR REAR FRONT
*Set the system switch to "NORM" when only a changer is connected (when the Ai-NET compatible equalizer is not used).
TO CONTENTS 1 ISO Antenna Plug 18 Remote Control Input Lead (White/Brown) Connect the external Alpine product to the remote contro l 2 ISO Antenna Conver ter Plug (Included) output lead. 3 Antenna Extension Cable 19 Reverse Lead (Orange/White) 4 ISO Connector (Included) Use only when a back-up camera is connected. Connect to the plus side of the car's reverse lamp that lights when 5 Battery Lead (Yellow) the transmission is shifted into reverse (R). Connect this lead to the positive (+) post of the vehicle's Switches the video picture to the back-up camera. This is battery. linked with putting the car into reverse (R). 6 Ground Lead (Black) 20 Remote Turn-On Lead (Blue/White) Connect this lead to a good chassis ground on the Connect this lead to the r emote turn-on lead of your vehicle. Make sure the connection is made to bare metal amplifier or signal processor. and is securely fastened using the sheet metal screw provided. 21 To amplifier or equalizer 7 Fuse Holder (10A) 22 Power Antenna Lead (Blue) Connect this lead to the +B terminal of your power 8 Digital Output Terminal (Optical) antenna, if applicable. Use when combining fiber digital input compatible products. 23 Audio Interrupt In Lead (Pink/Black) 9 Remote Control Interface Connector 24 To vehicle phone Connect to the remote control interface box. 25 Parking Brake Lead (Yellow/Blue) 10 Power Supply Connector Connect this lead to the power supply side of the parking brake switch to transmit the parking brake status signals 11 DC/DC Converter to the IVA-D900R. *Do not install the converter at a location subjected to water such as under the floor mat or air conditioner. This may cause 26 Connect this lead to the parking brake lead a malfunction. powered when parking brake is engaged. *Do not bundle the DC/DC converter cable with other audio 27 Switched Power Lead (Ignition) (Red) cables. Doing so may induce noise into your system. Connect this lead to an open terminal on the vehicle's fuse *Keep the DC/DC converter away from the Antenna cables and the rear side of the unit, otherwise noise may be generated box or another unused power source which provides (+) when receiving radio broadcast. 12V only when the ignition is turned on or in the accessor y position. 12 Remote IN/OUT Terminal 28 Fuse Holder (15A) 13 Display Output Terminal 29 Right Front (+) Speaker Output Lead (Grey) 14 Ai-NET Connector Connect this to the output or input connector of other 30 Right Front () Speaker Output Lead (Grey/Black) product (CD changer, Equalizer, etc.) equipped with Ai- 31 Right Rear () Speaker Output Lead (Violet/Black) NET. 15 32 Right Rear (+) Speaker Output Lead (Violet) Antenna Receptacle 33 Left Rear (+) Speaker Output Lead (Green) 16 System Switch When connecting an equalizer or divider using Ai-NET 34 Left Rear () Speaker Output Lead (Green/Black) feature, place this switch in the EQ/DIV position. When no device is connected, leave the switch in the NORM 35 Left Front () Speaker Output Lead (White/Black) position. 36 Left Front (+) Speaker Output Lead (White) *Be sure to turn the power off to the unit before changing the switch position. 37 Monitor Extension Cable (Included)
17 Remote Control Output Lead (White/Brown) 38 Subwoofer output Terminal Connect this lead to the remote control input lead. This Connect the input lead of an amplifier for the subwoofer to lead outputs the controlling signals from the remote this terminal. control. 39 Rear output Terminal Use when connecting an amplifier.
40 Front output Terminal Use when connecting an amplifier.
To prevent external noise from entering the audio system. *Locate the unit and route the leads at least 10 cm away from the car harness. Keep the batter y power leads as far away from other leads as possible. Connect the ground lead securely to a bare metal spot (remove any paint, dir t or grease if necessary) of the car chassis. If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further infor mation. Your Alpine dealer knows best about noise prevention measures so consult your dealer for fur ther infor mation.
TO CONTENTS Connect the Ai-NET compatible audio processor (Fiber digital compatible), Navigation system, DVD player and changer.
* Fiber digital Input terminal (for head unit) IVA-D900R Tuner BOX Audio Processor (Ai-NET) (Fiber Digital compatible) SUB W. (Sold Separately) PREOUT REAR
FRONT 6 6 2 R L
POWER SUPPLY
REMOTE IN/OUT Ai-NET
6 VIDEO
AUX OUT L Fiber digital NAVIGATION IN AUDIO 7 R Input terminal Fiber digital 1
2
3 DISPLAY OUT VIDEO Ai-NET (for DVD Player) AUX IN 1/2 (MONO) L 12 Input terminal AUDIO cable R (for Changer) 1
2 3
CAMERA IN VIDEO
(MONO) AUX IN 3 L
AUDIO
R Ai-NET 10 cable RADIO ANTENNA IN 10 ** Fiber optic cable
4 EQ/DIV 9 8 NORM Fiber optic cable
(Yellow)
(White/Brown) (White/Bro wn) DVD Video Player Ai-NET cable CD Changer (Ai-NET) REMOTE OUT REMOTE IN (Sold Separately) 11 (Sold Separately) (AUX 1) 13 ** Only connect fiber digital compatible CD Changer
*When connecting with PXA-H510 : - Connect the fiber digital input terminal to the DVD. - IVA-D900R and DVA-5205P cannot be connected simultaneously when fiber digital is in use. When the NVE-N055PS is connected for the Navigation System, use the RGB conversion cable KCE-030N (Sold separately).
1 RGB Cable (Included Navigation) 7 AUX Video Input (AUX1) Terminal Connect the video output lead of a DVD video player or 2 Remote IN/OUT Terminal DVD changer to this terminal. 3 RGB Input Terminal 8 RCA Extension Cable (Included with DVD video player) Connect this to the RGB output terminal of the Navigation System. 9 Ai-NET Cable (Included with DVD video player)
4 System Switch 10 Fiber optic Cable (Sold Separatel y) When connecting an equalizer or divider using Ai-NET 11 Ai-NET Cable (Included with Equalizer) feature, place this switch in the EQ/DIV position. When no device is connected, leave the switch in the NORM 12 Ai-NET Cable (Included with CD Changer) position. 13 Remote Control Output Lead (White/Brown) *Be sure to turn the power off to the unit before changing the Connect this lead to the remote control input lead. This switch position. lead outputs the controlling signals from the remote 5 Digital Output Terminal control.
6 Ai-NET Connector 14 AUX Audio/Video Input (AUX2) Terminals Connect this to the output or input connector of other 15 AUX Audio Input (AUX1) Terminals product equipped with Ai-NET.
4 Ai-NET 3 REMOTE IN/OUT VIDEO Rear monitor 2 NAVIGATION IN AUX OUT
AUDIO L 8 (Sold Separately) R 1
2 DISPLAY OUT VIDEO To Audio Input terminal (MONO) AUX IN 1/2 L
AUDIO
R 5 To Video Output terminal 1
2 3
CAMERA IN VIDEO TV Tuner or VCR AUX IN 3
AUDIO (MONO) L 8 (Sold Separately) R
RADIO ANTENNA IN To Audio Output terminal
To Video Output terminal 6 8 Back-up camera (Sold Separately)
7 (White/Brown) REMOTE OUT(AUX3) REMOTE IN (White/Brown)
10 (White/Brown) REMOTE IN(AUX1) REMOTE OUT (White/Brown)
10 (White/Brown) REMOTE IN(AUX2) REMOTE OUT (White/Brown)
REVERSE 9 (Orange/White) Use only when back-up camera is connected.
1 System Switch 8 RCA Extension Cable (Sold separately) When connecting an equalizer or divider using Ai-NET 9 Connect to the plus side of the car's reverse lamp feature, place this switch in the EQ/DIV position. When no device is connected, leave the switch in the NORM which lights when the transmission is shifted into position. reverse (R). Switches the video picture to the back-up camera. *Be sure to turn the power of f to the unit before changing the switch position. This is linked to putting the car into reverse (R). 10 Remote Control Input Lead (White/Brown) 2 Remote IN/OUT Terminal 3 AUX Video/Audio Output (AUX2) Terminal Use when connecting an optional monitor etc. 4 AUX Video/Audio Output (AUX1) Terminal Use when connecting an optional monitor etc. 5 AUX Video/Audio Input (AUX3) Terminal
6 CAMERA Input Terminal Use when connecting a back-up camera. 7 Remote Control Output Lead (White/Brown) Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control.
TO CONTENTS Adjustment Procedures 1. VIDEO Adjustment (1) Connections
Digital Tuner Unit Monitor Unit Oscilloscope
Pattern AUX1 DISPLAY Generator VIDEO OUT + Test Point CH-1 10 STEP-IN Test Point - CH-2 POWER AC Mode
DC14.4V
Only Step7-5 Only Step 7-1, -2, -3 and 8 DC/DC Converter Unit
(2) Adjustment
Test Point/ Step Operations Process P.W.Board Adjustment Coordinates Initialized setting up of products : 1 Start VIDEO Adjustment. OPEN/CLOSE KEY=OFF 2 BATT ON 3 ACC ON -1 Push OPEN/CLOSE KEY. 4 OPEN/CLOSE SW ON at lighting SLIDE -2 OPEN LED 5 POWER ON by pushing any KEY (1) Set up DIAG Mode (only RADIO Mode). -1 Push long "F7" KEY. -2 Next, push "V.SEL" KEY. -3 Next, push "LIST" KEY. 6 -4 Next, push "Rotary Encoder SW". Select "VIDEO CHK" by pushing "F3" (2) KEY at DIAG Mode. (3) Select "F4" KEY at VIDEO CHK Mode. -1. Select channel 0Dch by pushing "F3" NEXT KEY. Contrast Adjustment TP7121 -1 -2. Adjust to 0.7Vp-p by pushing "F1" UP KEY (G Level Adjustment) ( 1-E ) or "F2" DOWN KEY. (Refer to Figure-2) -1. Select channel 0Ech by pushing "F3" 7 NEXT KEY. TP7121 ( 1-E ) -2. Adjust to pushing "F1" UP KEY or "F2" -2 Sub Contrast-R Adjustment DOWN KEY so that wave-form of CH2(R) TP7120 ( 1-E ) may match wave-form of CH1(G). (adjust to 0.7Vp-p.) (Refer to Figure-2)
TO CONTENTS Test Point/ Step Operations Process P.W.Board Adjustment Coordinates -1. Select channel 0Fch by pushing "F3" NEXT KEY. TP7121 -2. Adjust to pushing "F1" UP KEY or "F2" ( 1-E ) -3 Sub Contrast-B Adjustment DOWN KEY so that wave-form of CH2(B) TP7122 may match wave-form of CH1(G). ( 1-E ) 7 (adjust to 0.7Vp-p.) (Refer to Figure-2) -1. Select channel 02ch by pushing "F3" TP7121 NEXT KEY. -4 Y-GAIN Adjustment ( 1-E ) '-2. Adjust to 0.7Vp-p by pushing "F1" UP KEY or "F2" DOWN KEY. Finish 2546ADJ Mode by pushing "F7" 8 RETURN KEY. 9 Push 2546 RESET by pushing "F5" SW. Finish DIAG Mode by pushing twice "F7" 10 RETURN KEY. -1 Push OPEN/CLOSE KEY. 11 OPEN/CLOSE SW OFF at lighting TILT -2 CLOSE LED POWER OFF by pushing long SOURCE 12 KEY 13 ACC OFF 14 BATT OFF Finish VIDEO Adjustment.
TO CONTENTS 2. FM/AM Tuner Adjustment (1) Dummy Antenna Circuit
10 ohm 45 ohm 30ohm 15pF
Input 60 ohm Output Input 65pF Output
For 50 ohm FM Signal Generator For 50 ohm AM Signal Generator (2) Connections
Antenna Receptacle
Monitor Unit + DC/DC Converter Unit DC Volt Meter
TP1121 TP2511 + + - GND - FM Signal Generator FM Dummy Antenna Tuner Unit * Connect to GND for 2 to 3 sec. Antenna Receptacle
Monitor Unit + DC/DC Converter Unit DC Volt Meter
TP1121 TP2511 + + - GND - AM Signal Generator AM Dummy Antenna Tuner Unit * Connect to GND for 2 to 3 sec.
(3) Control Settings
Power Switch ...................................................................... ON Band Switch ..................................... FM/MW/LW Fader Control ................................................... Center Position MX Effect ...................................................... OFF Balance Control ............................................... Center Position T-CORR Effect ............................................. OFF Treble Control ................................................... Center Position Others .......................................................... OFF Bass Control ..................................................... Center Position
(4) Adjustment Procedures
Test Point / Step Description Connection Signal Generator Dial Control P.W.Board Adjustment Coordinates
1. Select FM Mode. 2. Connect to TP1102 and GND for 2 to 3 sec. TP1102 87.5MHz (NOTE : Perform the auto adjustment FM S-METER (1-E) 1 Figure 5 (Input 28dBu, 87.5MHz by decreasing input level between 3 Adjustment TP1121 Mod. OFF) and 5dBu, and thenperform the (1-F) auto adjustment again with input level